3-1
3. Disassembly and Assembly
3. Disassembly and Assembly
This section describes the disassembly and reassembly sequences for this monitor.
As this monitor has parts that are sensitive to static electricity, be careful when
handling them.
3-1. Disassembly
Turn the monitor off before beginning the disassembly process.1.
When disassembling the monitor, do not use any metal tools except for the 2.
provided jig.
Disassemble the monitor carefully as directed in the following procedures.3.
Description Photo
1. Pull and separate the REAR SUB in the
direction of the arrows.
2. Unfastened the 4 screws, disconnect
the 2 cables, then separate the stand.
Screw
6001-001114
4 EA
To Next Page
Loading...
