Samsung Tab A 10.1 - Connecting to Other Devices

Basics
51
Connecting to other devices
1
Open the notification panel and tap Quick connect .
The Wi-Fi and Bluetooth features are activated automatically.
If Quick connect is not visible on the notification panel, tap
→
EDIT and tap the
Quick connect switch to activate it.
2
Tap Scan for nearby devices .
If there is no previously connected device, the device will automatically search for nearby
devices.
3
Select a device from the list and connect to it by following the on-screen instructions.
The next steps may vary depending on the connected device.
To change your device’s visibility setting, tap
MORE
→
Set device visibility , and then select
an option.
Sharing content
Share content with the connected devices.
1
Open the notification panel and tap Quick connect .
2
Tap Scan for nearby devices .
3
Select a device from the list of detected devices.
4
Tap Share content and select a media category.
5
Follow the on-screen instructions to send content to the connected device.
The next steps may vary depending on the selected media category.