Picture Options
Menu → Picture → Picture Options
Using this function, you can configure additional picture settings to suit your preference.
✎
When connecting a PC, you can only make changes to Colour Tone.
Picture Options
Colour Tone Standard
Digital Clean View Auto
MPEG Noise Filter Auto
HDMI Black Level Low
Film Mode Off
• Colour Tone (Cool / Standard / Warm1 / Warm2)
✎
Warm1 or Warm2 will be deactivated when the picture mode is Dynamic.
✎
Settings can be adjusted and stored for each external device connected to an input on the LED display.
• Digital Clean View (Off / Low / Medium / High / Auto / Auto Visualisation): If the broadcast signal received by your
LED display is weak, you can activate the Digital Clean View feature to reduce any static and ghosting that may
appear on the screen.
✎
When the signal is weak, try other options until the best picture is displayed.
Auto Visualisation: When changing analogue channels, displays signal strength.
✎
Only available for analogue channels.
✎
When bar is green, you are receiving the best possible signal.
• MPEG Noise Filter (Off / Low / Medium / High / Auto): Reduces MPEG noise to provide improved picture quality.
• HDMI Black Level (Low / Normal): Selects the black level on the screen to adjust the screen depth.
✎
Available only in HDMI mode (RGB signals).
• Film Mode (Off / Auto1 / Auto2): Sets the LED display to automatically sense and process film signals from all
sources and adjust the picture for optimum quality.
✎
Available in TV mode, HDMI (1080i), E X T.
✎
If the screen does not seem natural, change its option to Off / Auto1 / Auto2 in Film Mode.
To Next Page
Loading...
