EasyManua.ls Logo

Samsung U28R55 Series - PIP;PBP Screen Ratio

Samsung U28R55 Series
45 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
28
Screen Ratio
Select the image size for each screen.
PBP Mode (available in PBP mode(Screen Size ))
In PC mode
Auto: Display the picture according to the aspect ratio of the each screen input source.
Wide: Display the picture in full screen regardless of the aspect ratio of the each screen input
source.
In AV mode
4:3: Display the picture of the sub-screen with an aspect ratio of 4:3. Suitable for videos and
standard broadcasts.
16:9: Display the picture of the sub-screen with an aspect ratio of 16:9.
Screen Fit: Display the picture of the sub-screen with the original aspect ratio without cutting
anything off.
The function may not be supported depending on the ports provided with the product.
Changing the screen size is available when the following conditions are satisfied.
The input source is 480p, 576p, 720p, or 1080p and product can display normally (Not every model can
support all of these signals.).
This can only be set when the external input is connected through HDMI/DP and PC/AV Mode is set to
AV.
PIP Mode (available in PIP mode (Screen Size / / ))
In PC mode
Auto: Display the picture according to the aspect ratio of the each screen input source.
Wide: Display the picture in full screen regardless of the aspect ratio of the each screen input
source.
In AV mode
4:3: Display the picture of the sub-screen with an aspect ratio of 4:3. Suitable for videos and
standard broadcasts.
16:9: Display the picture of the sub-screen with an aspect ratio of 16:9.
Screen Fit: Display the picture of the sub-screen with the original aspect ratio without cutting
anything off.
The function may not be supported depending on the ports provided with the product.
Changing the screen size is available when the following conditions are satisfied.
The input source is 480p, 576p, 720p, or 1080p and product can display normally (Not every model can
support all of these signals.).
This can only be set when the external input is connected through HDMI/DP and PC/AV Mode is set to
AV.

Table of Contents

Related product manuals