Samsung UE C6000R Series - Factory Mode Adjustments

4-35
4. Troubleshooting
4-3. Factory Mode Adjustments
4-3-1 Entering Factory Mode
To enter ‘Service Mode’ Press the remote -control keys in this sequence :
- If you do not have Factory remote - control
MENUINFO MUTE Power on
- If you have Factory remote - control
INFOPICTURE ON FACTORY
- The buttons are active in the service mode.
1. Remote - Control Key : Power, Arrow Up, Arrow Down, Arrow Left
Arrow Right, Menu, Enter, Number Key(0~9)
2. Function - Control Key : Power, CH +, CH -, VOL +, VOL -,
Menu, TV/VIDEO(Enter)
4-3-2 How to Access Service Mode
Using the Customer Remote
Turn the power off and set to stand-by mode1.
Press the remote buttons in this order; POWER OFF - INFO - MENU - MUTE - POWER ON to turn the set on.2.
The set turns on and enters service mode. This may take approximately 20 seconds.3.
Press the Power button to exit and store data in memory. 4.
- If you fail to enter service mode, repeat steps 1 and 2 above.
Initial SERVICE MODE DISPLAY State 5.
Mode: CDTV . RES : 480I
Option
Control
SVC
Expert
ADC/WB
Advanced
T-VALDEUC-XXXX
T-VALDEUS-XXXX
EDID SUCCESS
CALIB : AV O COMP O PC O HDMI O
Option : xxxx xxxx xxxx
T-VALDEU-0101
DTP-SP-VAL-1098
RFS : 61-1G-62
0000-00-00
READING : XXXX
Type : 32D1UF0E
Model : UE32C6500
MAC SUCCESS
CIP SUCCESS LOCK X
Factory Data Ver : XXX
EERC Version : XXXX
DTP-AP-COMP-XXX-XX-XXXX
DTP-HIIG-XXXX-XX
DTP-BP-XXXX-XX
Date of purchase : XX/XX/XXXX
Buttons operations withn Service Mode 6.
Menu Full Menu Display/Move to Parent Menu
Direction Keys /
Item Selection by Moving the Cursor
Direction Keys /
Data Increase / Decrease for the Selected Item
Source
Cycles through the active input source that are connected to the unit