◀
▶
English
How to set up manually
To set up your TV’s cable network connection
manually, follow these steps:
1. Follow Steps 1 through 7 in the “How to set
up automatically” procedure.
2. Select the IP Settings on network test screen.
3. Set IP Mode to Manual.
4. Press the
d
button on your remote to go to
the first entry field.
● The displayed image may differ depending on
the model.
Subnet Mask 0 . 0 . 0 . 0
Subnet Mask 0 . 0 . 0 . 0
To Next Page
Loading...
