◀ ◀▶
English
■
Network Setup (WPS(PBC))
How to set up using WPS(PBC)
If your router has a WPS(PBC) button, follow
these steps:
1. Go to Network Settings screen. To enter it,
follow the directions of Network Settings.
2. Select the WPS(PBC).
3. Press the WPS(PBC) button on your router
within 2 minutes. Your TV automatically
acquires all the network setting values it needs and connects to your network.
4. The network test screen appears, and network setting is done.
● The displayed image may differ depending on the
model.
Network Setting
Select a network connection type.
Wired
Previous
Next
Cancel
Wireless (general)
WPS(PBC)
One Foot Connection
Connect to wireless router easily
by pressing the WPS(PBC) button.
Choose this if your wireless router
supports push button
configuration (PBC).
To Next Page
Loading...
