◀ ◀▶
English
●
3D
→
2D (Off / On): Displays the image for the left eye only.
N
This function is deactivated when 3D Mode set to “2D
→
3D” or Off.
●
3D Auto View (Off / Message Alert / On): If 3D Auto View is set to On, a “Side
by Side” format HDMI signal with one of the resolutions below is automatically
switched to 3D. If you set 3D Auto View to Message Alert, a pop up message
window appears when the TV receives a 3D signal. In this case, press the 3D
button because the TV does not switch to 3D.
N
If a 3D failure occurs due to a 3D information error, set 3D Auto View to
Off and manually select a 3D Mode using the 3D button or corresponding
menu.
N
In USB mode, this function is available only when the resolution is 1280 X
720p, 1920 X 1080i or 1920 X 1080p.
●
3D Optimisation
for LED TV
: The overall adjustment of 3D effect.
To Next Page
Loading...
