◀ ◀▶
English
Issues Solutions and Explanations
RF (Cable / Antenna)
Connection
The TV is not receiving all
channels.
•
Make sure the Antenna cable is connected securely.
•
Please try Plug & Play (Initial setup) to add available channels to the
channel list. Go to MENU - System - Plug & Play (Initial setup) and
wait for all available channels to be stored.
•
Verify the Antenna is positioned correctly.
The picture is distorted: macro
block error, small block, dots,
pixelization.
•
Compression of video contents may cause picture distortion, especially
with fast moving pictures such as sports and action movies.
•
A low signal can cause picture distortion. This is not a TV issue.
PC Connection
A “Mode Not Supported”
message appears.
•
Set your PC’s output resolution so it matches the resolutions supported
by the TV.
To Next Page
Loading...
