◀ ◀▶
English
Issues Solutions and Explanations
A message indicates a
performance test failure, and
the recording and Timeshift
Mode functions do not work.
•
These problems may occur if you use a low-performance USB device
that does not support recording. We recommend using a USB HDD
with at least 5 400 rpm, but a USB HDD of RAID type is not supported.
A scheduled recording has
failed.
•
A scheduled recording is disabled for certain operations (formatting,
performance test, error checking, deleting) that access the file system of
a USB device.
•
If there is no USB device connected, the TV will not record even if the
scheduled time is reached.
•
The TV will not record if the USB device has no free memory space.
Check that this is not the case.
•
If you record a channel locked with Program Rating Lock, the PIN
input window will appear when you try to play back the recording.
To Next Page
Loading...
