◀ ▶
English
Issues Solutions and Explanations
The TV Signal Information is
unavailable in the Self Diagnosis
menu.
•
This function is only available with digital channels from an Antenna /
RF/Coax connection.
The TV is tilted to the side.
•
Remove the base stand from the TV and reassemble it.
There are difficulties assembling
the stand base.
•
Make sure the TV is placed on a flat surface. It is necessary to use
magnetized screw driver if you cannot remove the screws from the TV
The channel menu is greyed
out. (unavailable)
•
The Channel menu is only available when the TV source is selected.
To Next Page
Loading...
