◀ ▶
English
When Antenna Source is set to Satellite:
●
Transponder: Selects the transponder using the up/down buttons.
●
Scan Mode (All Channels / Free Channels Only): Selects either free or all
channels to store.
●
Network Search (Disable / Enable): Enable / Disable network search using
the up/down buttons.
●
Signal Quality: Display the current status of broadcasting signal.
N
Information on a satellite and its transponder is subject to change depending
on the broadcasting conditions.
N
When setting is completed, move to Search and press the ENTER
E
button.
Channel scan is started.
To Next Page
Loading...
