◀ ◀▶
English
Installer Mode: Sets limits to the scope of movement of satellite antenna or
reset the position. Generally, installation guide uses this function.
–
Limit Position (East / West): Selects the direction of the positioner Limit.
–
Antenna Position: Adjusts and stores the antenna position for the selected
satellite.
–
Store Current Position: Stores the current position as the selected
positioner Limit.
–
Go to Zero: Moves the antenna to the reference position.
–
Reset Positioner Limit: Allows the antenna to rotate over the full arc.
●
Reset All Setting (Yes / No): All satellite settings will be reset to the initial
values.
To Next Page
Loading...
