◀ ◀▶
English
■
Network Setup (Auto)
Use the Automatic Network Setup when connecting your TV to a network that
supports DHCP. To set up your TV’s cable network connection automatically,
follow these steps:
How to set up automatically
1. Go to Network Settings screen. To enter it,
follow the directions of Network Settings.
2. Select the Wired.
3. The network test screen appears, and
network setting is done.
● The displayed image may differ depending on the
model.
Network Setting
Select a network connection type.
Wired
Previous
Next
Cancel
Wireless (general)
WPS(PBC)
One Foot Connection
Connect to the network using a
LAN cable. Please make sure that
the LAN cable is connected.
To Next Page
Loading...
