◀ ▶
English
How to set up manually
To set up your TV’s cable network connection manually, follow these steps:
1. Follow Steps 1 through 2 in the “How to set up
automatically” procedure.
2. Select the IP Setting on network test screen.
3. Set IP Mode to Manual.
4. Press the
d
button on your remote to go to the
IP Address.
● The displayed image may differ depending on
the model.
Subnet Mask 0 . 0 . 0 . 0
Subnet Mask 0 . 0 . 0 . 0
To Next Page
Loading...
