3-8
3. Disassembly and Reassemble
Description Picture Description
8
Remove 5 Screws on SMPS Board, and
then remove the board. (Power Cables
were already removed.)
Screws
6001-003016 5EA
TORQUE : 22.0 ~ 26.5lbf
9
Removing Main board.
Gently lift the top right corner of the •
board out to release the lock.
Use both hands to hold the board and •
slide to the left to release it.
CAUTION
When installing the Main board, verify
the board is properly positioned in all 4
mounting slots
1
2
Lift out of locks (top right corners) to release
Slide it out toward the left side to remove the board
To Next Page
Loading...
