Samsung UE65KS9502T - Page 9

3-5
3. Disassembly and Reassemble
Description & Screws Picture Description
14
Remove the DC VSS-PD BOARD (SMPS).
Gently lift out 4 corners of the board to •
release its locks.
Use both hands to hold the board and slide •
it toward the right side to remove. (It's easier
foryoutousebothhands-amiddlenger
for left side and a thumb for bottom side to lift
and slide out simultaneously).
NOTE
When installing the DC VSS-PD BOARD
(SMPS), verify the board is properly positioned
in all 7 mounting slots(
).
2
2
BottomchassisGuidethexingHoles
Locking
1
15
Remove the ASSY PCB MAIN.
Gently lift the top right corner of the board out •
to release the lock.
Use both hands to hold the board and slide to •
the left to release it.
NOTE
When installing the DC VSS-PD BOARD
(SMPS), verify the board is properly positioned
in all 4 mounting slots(
).
BottomchassisGuidethexingHoles
Locking
1
1
2
2
16
Remove the screws on T-CON BOARD and then
remove the T-CON BOARD.
65" : 4 EA•
Screws
6001-003016
SCREW-MACHINE : M3 x L5, ZPC(WHT)
NOTE
Reassembly procedures are in the reverse order of disassembly procedures.