• Information: Display
the information for a show or
channel
you
have
scheduled.
You
can
also
change the
schedule Information.
1
.
Select
the Programmed List icon on the
left
side of the
Channel
List screen, and then press the ENTER
[31
button.
2.
On
the Programmed List screen,
select
the show or
channel
entry you want information
for,
and then press the TOOLS
button. The Tools
Menu appears.
3.
Select Information,
and then press the ENTER
[31
button.
The Time Viewing
Information
screen appears.
4.
Select Change Info
and press the ENTER G button
to change information, or
select Close
and press the
ENTER
G
button to close
the
Information screen.
• Select
All
I
Deselect
All:
You
can
select
or
deselect
all
channels
in
the
channel list.
0 Other Channel
Menu Functions
Channel
Mode
(Added
Channels/Favorite
Channels)
Lets you
select
the channel list displayed
when you press the
ACHV
(Channel)
button on your remote. For
example,
if
you
select
Favorite
Channels,
you
will only
see Favorite
channels when
you press the
ACHV
button.
Fine Tune
Analog channels
only.
If
the reception
is
clear,
you
do
not have to fine tune the
channel,
as
this
is
done
automatically
during the search and store
operation.
If
the
signal
is
weak or distorted, fine tune the
channel
manually.
~
Select
the
channel,
and then
select
Fine Tune.
~
Fine tuned
channels
that have been saved are marked with
an asterisk
"*"
on the right -hand side of the
channel
number
in
the
channel
banner.
~
To
reset fine-tuning,
select
the
channel, select
Fine Tune, and
then
select
Reset on the Fine Tune screen.
Setup
Menu
Plug
&
Play
Lets you re-run the
Plug
&
Play initial
setup procedure. For
instructions, see your Quick Start
Guide.
Language
Set
the menu
language.
~
Choose between English,
Espaiiol,
and
Fran<;ais.
0 Setting the Time
Time
~
The time you set
will
appear when you press the INFO
button.
Il
l
• Clock: Set
the
clock
so you can use the various timer features
of the
TV.
~
If
you disconnect the power cord, you have to set the
clock
again.
-
6-
To
set the clock,
follow
these steps:
1 .
Select Setup
>Time >
Clock.
2.
Press
ENTER
[31
and
select
Auto
or
Manual, and then press
ENTER
[31
again.
If
you selected Auto:
The
TV
will automatically download the correct time from a
digital channel.
• Select
Time
Zone,
and then press the ENTER
[31
button.
Use
the•/T
buttons
to
select
your Time Zone, and then
press ENTER
G.
• Select DST (Daylight Savings
Time), and then press
ENTER
[31.
Select
On
if
you want to turn the DST
adjustment
on
and off manually. Select Off
to turn off the
DST
adjustment.
Select
Auto if you want the
TV
to adjust
to
DST automatically. Press
ENTER
G
when done.
~
DST
and Time
Zone function are
only available
when
the Clock
Mode
is set to Auto.
If
you selected Manual:
The
Clock Set
screen appears. Use the
•
IT
buttons
to
change the
values
in
each
field or use the number buttons to
enter the
values directly.
Use the
<IIIII/.,.
buttons
to
move from
field
to
field.
When done with
all
the
fields,
press ENTER
G.
~
Available only
when Clock
Mode
is set to
Manual.
• Sleep
Timer
II+E!I!J
Automatically
shuts off the
TV
after a preset period of time.
(30,
60, 90, 120, 150
and
180
minutes).
~
To
cancel
the
Sleep
Timer,
select Off.
Timer
1
I
Timer 2
I
Timer 3
Turns the
TV
on and off automatically at times and days you
select.
You
can set three different on/off timer settings.
~
You
must set the
clock
first.
•
On
Time
I Ott
Time:
Set
the hour, minute, am/pm, and
Activate/Inactivate
fields
for the On
Time and
Off Time. Use the
<IIIII/.,.
buttons to move from
field
to
field. Use the
•t'f'
buttons
to change the
values
in
each
field.
To
activate the timer with
the setting you have chosen, set the Activate/Inactivate field
to
Activate.
•
Volume:
Set
the desired loudness.
•
Contents:
To
select
what
will
be turned on when the timer
setting
is
activated.
You
can set the TV to turn on a specific
channel or
play
back contents such as photo or audio files.
Use the
<IIIII/.,.
buttons
to
move
to
move to the Contents field,
and then press the ENTER
[31 button. The Contents screen
appears. Use the
<IIIII/.,.
buttons to move from
field
to
field.
Use
the
•t'f'
buttons
to
change the
values
in
each
field.
-TV/USB:
Select TV
or
USB.
The USB
device must be
connected
to
your TV before you can
select USB.
-Antenna: Displays
the current antenna source, Air
or
Cable.
-Channel
:
If
you have
selected
TV,
select
the desired channel.
-Music/Photo:
If
you have
selected USB, follow
these steps to
select
a
folder
containing
MP3
(Music) or
JPEG (Photo) files
on
the
USB
device:
~
The
maximum
displayed number of
files, including sub
folders,
in
one
folder
of
USB
storage device is
2000.
~
The media may not be
playing smoothly when using the
device
lower than
USB 2.0.
1.
Use the
<IIIII/.,.
buttons to move to the
field
under Music
or the
field
under Photo, and then press the ENTER G
button. The TV
displays
a
single folder
(the Root
folder)
and the type or name of the device.
To Next Page
Loading...
