Securing
the
TV
to
the
Wall
Caution: Pulling,
pushing, or
climbing
on the TV may cause the
TV to
fall.
In
particular, ensure your
children
do
not hang
on
or
destabilize
the
TV.
Doing so may cause the
TV
to tip over, causing
serious injuries or death.
Follow all
safety precautions provided
in
the
Safety Flyer included
with your
TV.
For added
stability
and safety, you can purchase and
install
the
anti-fall
device as
described
below.
To
Avoid
the
TV from
Falling
1
.
Put
the screws into the clamps
and
firmly
fast
en
them onto the
wall.
Confirm that the screws ha
ve
been
firmly
installed onto the
wall.
~
You may
ne
ed
additional material
such as
an
anchor depending on the
typ
e
of
wall.
~
Since
the necessary
clamps,
screws, and string are not
supplied, please
purchase these
additionally.
2.
Remo
ve
the screws from the back center
of
the
1V,
put the screws into the
clamps,
and then fasten the
screws onto the
1V
again.
~
Screws
may not be supplied
with the product.
In
this case,
please purchase the screws
of
the
following specifications.
~
Screw
Specifications
•
For a
19-
28 inches:
M4
•
For a 32 - 65 inche
s:
M8
3. Connect the
clamps
fixed onto the
1V
and the
clamps
fi
xed onto
the
wall
with a strong
cable
and then tie the string
tightly.
~
NOTE
Install the
1V
near
to
the
wall
so that it does not
fall
backwards.
It
is safe to connect the string so that the clamps
fi
xed on the
wa
ll
are
equal
to
or lower
than the
cla
mp
s
fixed on the
1V.
Untie the string before moving the
1V
.
4.
Verify
a
ll
co
nnections are
properly
secured. Periodically
ch
ec
k the
connections for
an
y sign of fatigue
or
failure. If
you have any doubt
about the security
of
your connection
s,
co
ntact a
professional
in
sta
ll
er.
..···
·········
...
:·~·
.·"
~
.
.
..
.
. .
.
.
.
.
.·
··
·····
To Next Page
Loading...
