Samsung UN32F5500 - Wiring the Mains Power Supply Plug (UK Only)

Wiring
the
Mains
Power
Supply
Plug(UK
Only)
IMPORTANT NOTICE
The mains lead
on
this equipment is
supp
lied with a moulded
plug
incorporating a fuse. The
value
of
the fuse is indicated on
the
pin face
of
the
plug
and, if it requires replacing, a fuse approved
to
BSI1362
of
the same rating must be used.
Never use the
plug
with the fuse cover omitted if the cover is detachable.
If
a replacement fuse cover is required, it must
be
of
the same
colour
as the pin face
of
the
plug.
Replacement covers are
available
from your dealer.
If
the fitted
plug
is
not
suitable for the
power
points
in
your house
or
the
cable
is
not
long enough
to
reach a power point, you
should
obtain a suitable safety approved extension
lead
or
consult your dealer
for assistance. However, if there is no alternative
but
to
cut off the
plug, remove
the
fuse and then
safely dispose
of
the
plug.
Do
NOT
connect the plug
to
a mains socket as there is a risk of shock hazard from the bared
flexible
cord.
IMPORTANT
The wires in the mains lead
are coloured
in
accordance with the
following
code:
BLUE
-
NEUTRAL
BROWN -
LIVE
As these colours may
not
correspond
to
the coloured markings identifying the terminals
in
your
plug, proceed as
follows
:
The wire coloured BLUE must
be
connected
to
the terminal marked with the
letter
N
or
coloured BLUE or BLACK. The wire coloured
BROWN
must be connected
to
the terminal marked with the
letter
Lor
colour
ed
BROWN
or
RED.
WARNING:
DO NOT CONNECT EITHER WIRE TO
THE EARTH
TERMINAL, WHICH
IS
MARKED
WITH
THE
LETTER E OR
BY
THE EARTH
SYMBOL
,
OR COLOURED
GREEN
OR GREEN AND
YELLOW.
Ru
ssia
Only
-
PCT
Notice
~~
AB57
MPR
II
Compliance
(MPR
II
applied
model
only)
Thi
s monitor complies with SWE
DA
C
(MPR
II)
re
commendations for reduced electric and magnetic fields.