Samsung UN40C6300SFXZA - On-Screen Failure Examples and Alignments; On-Screen Failure Examples; Alignment and Option Bytes; Firmware Upgrade and Reset

4
ON SCREEN FAILURE EXAMPLES: ALIGNMENTS:
Fast Track Troubleshooting Manual
SPECIAL NOTES:
Inform customer of reset of all
Settings if Main Board or Panel is replaced.
1. Check/Set Option Bytes:
Green lines or a green screen
defective main board , LVDS , or
T-CON.
If Picture & Display errors
Defective Main Board, LVDS,
or T-CON
2. Check/Perform Firmware Upgrade for
all repairs.
3. Perform reset in Service Mode &
Plug and Play if Main board is replaced.
De-lamination: PANEL
FAILURE
Vertical or Horizontal Lines :Defective
Panel likely but also T-CON, LVDS, or Main
Board. Use Test Patterns in Factory Service
Mode to determine error)
Model
Code
Side Label
UN40C6300S
FXZA
SQ01
CN02
SS03
SQ04
CN05
SS06
HQ07
H308
HQ09
H310
Option
Type Model Tuner
Light
Effect
Country
Front Color
40A1UF0E UC6300 SEMCO OFF USA W-D-Gray
40D1UF0E UC6300 SEMCO OFF USA W-D-Gray
40A1UF1E UC6300 SEMCO OFF USA W-D-Gray
40A1UF0E UC6300 SN761640 OFF USA W-D-Gray
40D1UF0E UC6300 SN761640 OFF USA W-D-Gray
40A1UF1E UC6300 SN761640 OFF USA W-D-Gray
40A1UF1E
UC6300 SN761640 OFF USA W-D-Gray
40A1UF1E UC6300 SN761640 OFF USA W-D-Gray
UN40C6300SFXZA