Samsung UN40H4203AH - Entering Factory Mode

4-3-2. Entering Factory Mode
To enter ‘Service Mode’ Press the remote -control keys in this sequence :
If you have Factory remote control•
INFO Factory
If you don’t have Factory remote control, can’t control some menus. 1.
Option
Control
Debug
SVC
ADC/WB
Advanced
T-NT14MUABC-xxxx
T-NT14MAKUCSS-xxxx
BT Version :*****
E-Manual : NMISDBH-1.****
EDID SUCCESS
CALIB : AV/COMP/PC/HDMI/
Option : **A6AF1D,US,4203,NONE (Vary by
inches)
DTP-SDAL-NT14M-MAIN-****-****
RFS : "NT14M ****" K/2 2014-0*-**
KERNEL : 107.1272,/ Onboot : 00**
DTP-DTVTD-****
Model : UN**H4203
Wired MAC SUCCESS
Wireless MAC SUCCESS
WIFI :ATH6KL (5.0.0.99_****)
C/Nf/W/M/D/HO PO AO /S/ N/
Factory Data Ver : 191 /EERC Ver :77
Smart control : ****
DTP-BP-HAL-4718
DTP-BP-HW- 4718
DTP-BP-APP-4718-02
POP-FLA-14-HD_SMART-**
Date of purchase : mm/dd/yyyy
4-9
4. Troubleshooting