3-6
3. Disassembly and Reassemble
How to reassembly
Description Picture Description Refer
1
Place PCT.
2
Assemble ASSY MISC P-CHASSIS
TOP(L/R) and ASSY MISC P-CHASSIS
TOP( U/D) using the hook.
* HOOK POINT
Top : 6Point / Bottom : 5 Point
Right : 4-Point / Left : 4-Point
CAUTION
Check whether the hooks are completely
assembled.
3
Place Assy MISC P-Open Cell on the
FRAME-MOLD MIDDLE GUIDE in the
same direction as the picture.
CAUTION
Be careful not to make COF lm bent or
folded during assembly of open cell.
1
2
2
2
2
1
To Next Page
Loading...
