Samsung UN46F7500 - Using 3 D Active Glasses; Turning Glasses On;Off and Pairing; Operating Range and Pairing Steps

•
Turning
the
glasses on
Press
the
power button briefly. The green LED turns on for 3 seconds.
(Make sure that 3D
is
activated on the TV before using the 3D glasses.)
•
Turning
the
glasses off
Press the power button briefly. The
red
LED turns on for 3 seconds.
• Performing
the
pairing process
Turn the TV on and
let
it power
up
completely. Press and hold the Power
button on the glasses. The green and the red LEOs blink alternately for 2
seconds.
•
Operating range
Recommended
pairing
distance
2-6m
l~
~
Recommended
viewing
distance
Re<;ommended
viewing
distance
Recommended
pairing
distarii;e
.
2
-6
m
(6.
5
to
19.5
ft)
50
em
or
less
(19.5
i
n)
~
Once
the 3D glasses are paired, the remaining battery capacity is displayed on
the
TV
screen. (This
feature only applies to Samsung F series
3D
TVs and
3D
glasses that have been available since 2013.)
~
If
you keep trying
to
pair the glasses and the TV after pairing has failed, the battery
level will
decrease
significantly. However, the battery
level will recover to a certain degree
in
about a minute.
~
The working distance
is
affected
by
the presence
of
obstacles
(a
person, metal,
walls,
etc.) between
the glasses and the
TV
and the strength
of
the Bluetooth
signal.
~
Turn
off
the
3D
glasses when they are not
in
use.
If
you leave the
3D
glasses on, the battery lifespan
decreases.
Pairing
steps
1.
Turn on the
TV,
and then move the glasses within 19.5 inches of the
TV.
2. Press the power button on the 3D glasses briefly. The
3D
glasses
will
power on
and
pairing
will
start.
3.
The message
"3D
glasses are connected
to
TV.
" will
be displayed on the TV screen when the pairing
is
successfully
completed.
• If
pairing
fails,
the
3D
glasses
will
power off.
• If
the first atte
mpt
to
pair fails,
pow
er the TV off and on again and perform step 2.
•
How
to
pair again: Press the power button on the
3D
glasses for more than 1 second.
You
must pair
the
glasses again
in
the
following
situations:
-
If
the 3D glasses
do
not function, even when the
power
button
is
pressed,
especially
if the
TV
has
just been a repaired.
-
If
you want to play 3D content on another Samsung 3D TV model that belongs
to
the
D,
E,
or F
series released
in
2011 through
2013.
You
must pair the glasses with the other
TV.