3-2
3. Disassembly and Reassemble
Description Picture Description Screws
3
Insert the Open Jig tool into left bottom
side of the rear cover and following
directions
1
→
2
→
3
Open Jig
1 3
2
HOOK
If you cannot open, nd the locking point
JIG
disassembling
Press
SET
4
Gently lift up the Rear Cover from the
bottom corners to release all mounting
clips as indicated by Red Rectangles .
Do not damage on double-sided tape
located at the edge of the top side.
Locking part
To Next Page
Loading...
