Option
Factory Reset
Type --A1MU0QK
Local Set US
SW Model UKS7000
BOM Model 8000
TUNER S_T2C
Ch Table NONE
MRT Option
Engineer Option
Setting Option Bytes
Enter Factory Mode with Service Remote (only)1.
Check Option Byte Table located on GSPN (Fast Track or Tips)2.
Select each item to change 3.
Soft power TV Off to load4.
SVC → Test Patterns
Main Board
JAZZ-M
FRC
T-CON
1 Scaler Pattern
US Post Pattern
4 SoC TCON Test Pattern
2 FRC Pre Test Pattern
3 FRC Post Test Pattern
Check Test Patterns
Verify “Scaler Pattern” and “US Post Pattern”1.
Verify “FRC Pre Test Pattern”2.
Verify “FRC Post Test Pattern”3.
Verify “SoC TCON Test Pattern”4.
To Next Page
Loading...
