m
Speaker Settings
® Speaker Select (llExtema_ Speaker /$ 8peake8
if you are listening to the sound track of a broadcast or movie through an
external receiver, you may hear a sound echo caused by the difference in
decoding speed between the TV's speakers and the speakers attached to
your audio receiver, if this occurs, set the TV to IExtema_ Speaker,
% When you set Speaker Select to IExtema_ Speaker, the TV's speakers
are turned off, You wiii hear sound through the external speakers only,
When you set Speaker Select to _ Speaker, both the TV's speakers
and the external speakers are on, You will hear sound through both,
%
When Speaker Select is set to IExtema_ Speaker, the VOLUME and
MUTE buttons will not operate and the sound settings will be limited.
% If there is no video signal, both the TV's speakers and the external
speakers wiii be mute,
To Next Page
Loading...
