English - 4
Using the TV’s Controller (Panel Key)
✎
The product color and shape may vary depending on the model.
Power on Turns the TV on by pressing the controller in standby mode.
Adjusting the volume
Adjusts the volume by moving the controller from side to side when the power is
on.
Selecting a channel Selects a channel by moving the controller up and down when the power is on.
Using the function menu
Press the controller when the power is on, then the function menu screen appears.
If you press it again, the function menu screen disappears.
Selecting the Menu (
m
)
Selects the Menu(
m
) by moving the controller in the function menu screen. The
OSD(On Screen Display) of your TV’s feature appears.
Selecting the Contents Home
Selects the CONTENT by moving the controller in the function menu screen. The
Contents Home main screen appears.
Selecting the Source (s)
Selects the Source (s) by moving the controller in the function menu screen. The
Source list screen appears.
Power Off (
P
)
Selects the Power Off (
P
) to turn the TV off by moving the controller in the
function menu screen.
✎
Exits the menu when pressing the controller more than 1 second.
✎
When selecting the function by moving the controller to the up/down/left/right directions, be sure not to press the
controller. If you press it first, you cannot operate it to move the up/down/left/right directions.
Standby mode
✎
Your TV enters Standby mode when you turn it off and continues to consume a small amount of electric power. To be
safe and to decrease power consumption, do not leave your TV in standby mode for long periods of time (when you are
away on vacation, for example). It is best to unplug the power cord.
TV Controller
Remote control sensor
Function menu
CONTENT
m R
P
Return
[UE6030-ZD]-BN68-04469A-L02.indb 4 2012-05-21 �� 11:52:31
To Next Page
Loading...
