Need help?Do you have a question about the Samsung UN55HU9000FXZA and is the answer not in the manual?
General| Screen Type | led |
|---|---|
| Wall Mount | 400mm x 400mm |
| Screen Size | 54.63 inches, 55 inches |
| Refresh Rate | 120hz |
| Number Of Speakers | 2 |
| USB Ports | 1 |
| Digital Optical Audio Outputs | 1 |
| Component Video Inputs | 1 |
| Composite Video Inputs | 2 |
| DVI | 0 |
| Remote Control | smart |
| 3D | yes |
| Power Consumption | 255 kilowatt hours |
| Depth with Stand | 12.13 inches |
| Height with Stand | 30.25 inches |
| Width with Stand | 48.5 inches |
| Depth without Stand | 3.75 inches |
| Height without Stand | 28.5 inches |
| Net Weight without Stand | 44.5 pounds |
Details the technical specifications, dimensions, and weight of the HU9000 series TVs.
Explains the TV's key features and the functions of the remote control and touch pad.
Describes how to turn on and control the TV using the Smart Control and TV Controller.
Explains how to connect the One Connect box to the TV for external device integration.
Illustrates the interconnections between major functional blocks of the TV.
Identifies major internal components like Main Board, SMPS, and T-CON on the TV chassis.
Illustrates internal wiring connections and the SMPS board layout and connectors.
Covers the layout, operation, and testing procedures for the backlight and micro-dimming board.
Details the Main Board and One Connect Box layouts and pin assignments.
Outlines the power sequence and testing procedures for the SMPS.
Explains how to test the T-CON board for voltage and fuse integrity.
Explains how to check and test the Jog Function Control for TV operation.
Lists repair preparation steps and common screen failure symptoms.
Outlines troubleshooting flow, test patterns, and picture test error interpretation.
Guides on troubleshooting Wi-Fi MAC addresses and Bluetooth module connectivity.
Covers pairing procedures and troubleshooting steps for 3D glasses.
Addresses specific issues like no on-screen video for the One Connect Box.
Displays system information (SVC Info) accessible via Factory Mode.
Explains how to set option bytes in Factory Mode for model configuration.
Lists voltages to verify in Factory Mode for self-diagnosis.
Details the procedure for writing EDID data in Factory Mode to reset HDMI.
Covers initial steps like removing the stand, rear cover, and internal modules.
Instructions for removing TV board, T-CON board, BT, IR, and WiFi units.
Covers speaker removal, important cautions, and torque recommendations.
To Next Page