Auto Program

The Auto Program function memorizes all channels that are

available over the air or through your cable system and adds them to

the Channel List.

To start Auto Program, follow these steps:

1. Push MENU

→ Channel → Auto Program → ENTER

your remote. The Antenna Source screen appears.

2. On the Antenna Source screen, select the source of your TV

signal.

Air

If your TV is connected to an antenna choose Air, and then press

ENTER

. The TV will automatically start memorizing channels.

Cable

If your TV is connected to a cable outlet, choose Cable, and then

press ENTER

. Go to Step 3.

Auto

If you choose Auto, and then press ENTER

, the TV will

automatically select the correct Antenna source. Go to

Step 3.

3. On the Cable Type screen, use the ◄/►/▲/▼ buttons to select

the type of digital and analog cable systems you have: STD, HRC,

or IRC. Most systems are STD (Standard). When done, select

Start, and then press ENTER

. The TV will start memorizing

channels.

✎ Channe l memorization can take up to 45 minutes, depe nding

on your cable system.

✎ Memorized channels are added to the Added Channels

list. These are the channels you will se e when you use the

Channe l buttons on your remote.

Clear Scrambled Channel

This function ﬁlters out scrambled channels after Auto Program is

completed. This process may take up to 20~30 minutes.

✎ Press the ENTER

button to stop the Clear Scrambled

Channel.

✎ This function is only available in Cable mode.

❑ Managing Channels

Channel List

See your list of Added channels, Favorite channels, or channels

you've scheduled for viewing. Add or delete Favorite channels, add

or delete channels from the Added Channels list, schedule channels

or programs for viewing. Watch a channel by selecting the channel

in the All Channels, Added Channels, or Favorite screen, pressing

the ▲ / ▼ buttons, and then pressing the ENTER

button.

Added Channels

6 Air

6-1 ♥ TV #6

7-1 ♥ TV #7

8 Air

9 Air

9-1 ♥ TV #9

10 Air

10-1 ♥ TV #10

11-1 ♥ TV #11

Air ' Zoom ' Select T Tools ► Next Program

Channel List Screens icons are listed on the left side. Select an

icon using the ▲/▼ buttons to view each list.

■

All Channels: Shows all currently available channels including

those you deleted from the Added Channels

list.

■

Added Channels: Shows all Added Channels. These are the

channels that appear when you press the CH button.

■ *

Favorite: Shows all favorite channels.

■

Programmed: Shows all channels and programs currently

scheduled using Timer Viewing.

✎ Remote control buttons active on the Channel List screen.

x Green (Zoom): Enlarges or shrinks a channel number.

x Yel lo w (Select): Move the cu rsor to a chann el. Press the Yellow

button to select the channel. A

mark ap pears. Repeat to select

additional channels. Then, ope n the Tools menu and a pply a

function to the channels you selected.

(To ols ): Displays the Channel List Tool s menu. (Th e Tools

menus may differ depending on the situation.)

Display Icons Used in the Channel List Screens

Icons Meaning

A selected channel.

A Favorite channel.

)

A reserved program.

(

A program currently being broadcast.

❑ The Channel List Tools Menu

The Channel List Tools menu contains most of the functions you

can use on the

All Channel

Added Channels

, and

Favorite List

screens. To view, select a list screen, select a channel, and then

press the

TOOLS

button.

■

Add / Delete: Delete a channel from or add a channel to the

Added Channels list.

To delete channels from the Added Channels list, follow these steps:

1. Select one or more channels in the Added Channels list using

the ▲/▼ buttons and the Yellow Select button on your remote.

2. Press the TOOLS button on your remote. The Tools menu

appears.

3. Select Delete in the Tools menu, and then press the ENTER

button.

To add channels to the Added Channels list, follow these steps:

1. Select one or more channels in the All Channels list using the

▲/▼ buttons and the Yellow Select button on your remote.

2. Press the TOOLS button on your remote. The Tools menu

appears.

3. Select Add in the Tools menu, and then press the ENTER

button.

✎ All deleted channels will be shown on the All Channels list.

You add channels back to the Added Channels list on the

All Channels list.

✎ A gray-colored channel indicates the channel has been

deleted f rom the Added Channels list.

✎ The Add menu option only appears for deleted channels.

■

Add to Favorite/Delete from Favorite t: Lets you add

channels to and delete channels from your Favorites list.

To add channels to the Favorites list, follow these steps:

1. Select one or more channels in the All Channels list using the

▲/▼ buttons and the Yellow Select button on your remote.

2. Press the TOOLS button on your remote. The Tools menu

appears.

3. Select Add to Favorite in the Tools menu, and then press the

ENTER

button.

To delete channels from the Favorites list, follow these steps:

1. Select one or more channels in the Favorite Channels list

using the ▲/▼ buttons and the Yellow Select button on your

remote.

2. Press the TOOLS button on your remote. The Tools menu

appears.

3. Select Delete from Favorite in the Tools menu, and then

press the ENTER

button.

■

Timer Viewing: You can schedule a channel to be displayed

automatically at a set time, even when you are watching another

channel. You must set the current time ﬁrst in the Time > Clock

function to use Time Viewing.

To schedule a channel, follow these steps:

1. Select a channel in the Added Channels list using the ▲/▼

buttons and the Yellow Select button on your remote.

2. Press the TOOLS button on your remote. The Tools menu

appears.

3. Select Time Viewing in the Tools menu, and then press the

ENTER

button. The Time Viewing screen appears.

Antenna Channel Repeat

▲

DTV Air 6-1 Once

▼

Move

Adjust

Enter

Return

Timer Viewing

Date Start Time

01-01-2012 12 : 01 am

4. Use the ◄/► buttons to move from entry ﬁeld to entry ﬁeld

and the ▲/▼ buttons to change the entries. Where numbers

are displayed, you can also enter numbers directly using the

number keypad on your remote.

✎ If you sele ct Everyday or Every Wee k, the date you

select in the Date field b ecomes the start date for your

schedu led viewing. For Everyday, the TV will turn on

every day, at the time you selected, starting from that

date. For Ever yweek, the T V will turn on eve ry week,

on the same day of the week as the start date you

selected, at the time you selected, from that day on. If

you select Once, the TV will turn on once, on the date

and time you selected.

5. Press the ENTER

button on your remote when done.

✎ Only Added Channels can be scheduled.

✎ Scheduled programs and channels are displayed in the

Programmed List.

✎ When you select a digital channel, press the ► but ton to

view the digital program list. If you highlight a program in

the list, and then press the ENTER

(Schedule) button,

you set Timer Viewing for that program directly.

■

Select All: Select all the channels in the displayed channel list.

■

Deselect All: Deselect all the selected displayed channels.

✎ You can only select Deselect All when one or more

channels are selected.

■

Channel Name Edit: Analog channels only. Lets you assign a

name of up to ﬁve characters to an analog channel. For example,

Hist, Food, Golf, etc. This makes it easier to ﬁnd and select a

channel .

■

Auto Program: See Auto Program under Memorizing Channels.

Programmed List (on the Channel List Screen)

The Programmed list displays the channels and programs you

have scheduled for viewing using the Time Viewing function. You

can view, modify, or delete a show you have scheduled using the

functions on the Programmed List screen Tools menu.

Programmed List Screen Tools Menu

■

Change Info: Change the scheduling information for a show or

channel you have scheduled.

To change the information, follow these steps:

1. Select the Programmed List icon on the left side of the

Channel List screen, and then press the ENTER

button.

2. On the Programmed List screen, select the show or channel

entry you want to change, and then press the TOOLS button.

The Tools Menu appears.

3. Select Change Info, and then press the ENTER

button.

The Time Viewing screen appears.

4. Use the ◄/► buttons to move from entry ﬁeld to entry ﬁeld

and the ▲/▼ buttons to change the entries. Where numbers

are displayed, you can also enter numbers directly using the

number keypad on your remote.

5. Press the ENTER

button when done.

■

Cancel Schedules: Cancel a show or channel you have

scheduled.

To cancel a scheduled show or channel, follow these steps:

1. Select the Programmed List icon on the left side of the

Channel List screen, and then press the ENTER

button.

2. On the Programmed List screen, select the show or channel

entry you want to cancel, and then press the TOOLS button.

The Tools Menu appears.

3. Select Cancel Schedules, and then press the ENTER

button. The Cancel Schedule screen appears.

4. Select OK, and then press the ENTER

button.

■

Information: Display the information for a show or channel you

have scheduled. You can also change the schedule Information.

1. Select the Programmed List icon on the left side of the

Channel List screen, and then press the ENTER

button.

2. On the Programmed List screen, select the show or channel

entry you want information for, and then press the TOOLS

button. The Tools Menu appears.

3. Select Information, and then press the ENTER

button.

The Time Viewing Information screen appears.

4. Select Change Info and press the ENTER

button

to change information, or select Close and press the

ENTER

button to close the Information screen.

■

Select All / Deselect All: You can select or deselect all

channels in the channel list.

❑ Other Channel Menu Functions

Channel Mode (Added Channels/Favorite

Channels)

Lets you select the channel list displayed when you press the

<CH> (Channel) button on your remote. For example, if you

select Favorite Channels, you will only see Favorite channels when

you press the <CH> button.

Fine Tune

Analog channels only.

If the reception is clear, you do not have to ﬁne tune the channel,

as this is done automatically during the search and store

operation. If the signal is weak or distorted, ﬁne tune the channel

manually.

✎ Select the channel, and then select Fine Tune.

✎ Fine tuned channels that have been saved are marked with

an asterisk “*” on the right-hand side of the channel number

in the channel banner.

✎To reset fine-tuning, select the channel, select Fine Tune, and

then select Reset on the Fine Tune screen.

Setup Menu

Plug & Play

Lets you re-run the Plug & Play initial setup procedure. For

instructions, see your Quick Start Guide.

Language

Set the menu language.

✎ Choose between English, Español, and Français.

❑ Setting the Time

Time

✎ The time you set will appe ar when you press the INFO

button.

■

Clock: Set the clock so you can use the various timer features

of the TV.

✎ If you disconnect the power cord, you have to set the

clock again.

To set the clock, follow these steps:

1. Select Setup >Time > Clock.

2. Press ENTER

and select Auto or Manual, and then press

ENTER

again.

If you selected Auto:

The TV will automatically download the correct time from a

digital channel.

• Select Time Zone, and then press the ENTER

button.

Use the▲/▼ buttons to select your Time Zone, and then

press ENTER

• Select DST (Daylight Savings Time), and then press

ENTER

. Select On if you want to turn the DST

adjustment on and off manually. Select Off to turn off the

DST adjustment. Select Auto if you want the TV to adjust

to DST automatically. Press ENTER

when done.

✎ DST and Time Zone function are only available when

the Clock Mode is set to Auto.

If you selected Manual:

The Clock Set screen appears. Use the ▲/▼ buttons to

change the values in each ﬁeld or use the number buttons to

enter the values directly. Use the ◄/► buttons to move from

ﬁeld to ﬁeld. When done with all the ﬁelds, press ENTER

✎ Available only when Clock Mode is set to Manual.

■

Sleep Timer

Automatically shuts off the TV after a preset period of time. (30,

60, 90, 120, 150 and 180 minutes).

✎ To cancel the Sleep Timer, select Off.

Timer 1 / Timer 2 / Timer 3

Turns the TV on and off automatically at times and days you

select. You can set three different on/off timer settings.

✎ You must set the clock first.

■

On Time / Off Time: Set the hour, minute, am/pm, and

Activate/Inactivate ﬁelds for the On Time and Off Time. Use the

◄/► buttons to move from ﬁeld to ﬁeld. Use the ▲/▼ buttons

to change the values in each ﬁeld. To activate the timer with

the setting you have chosen, set the Activate/Inactivate ﬁeld to

Activate.

■

Volume: Set the desired loudness.

■

Contents: To select what will be turned on when the timer

setting is activated. You can set the TV to turn on a speciﬁc

channel or play back contents such as photo or audio ﬁles.

Use the ◄/► buttons to move to move to the Contents ﬁeld,

and then press the ENTER

button. The Contents screen

appears. Use the ◄/► buttons to move from ﬁeld to ﬁeld. Use

the ▲/▼ buttons to change the values in each ﬁeld.

- TV/USB: Select TV or USB. The USB device must be

connected to your TV before you can select USB.

- Antenna: Displays the current antenna source, Air or Cable.

- Channel: If you have selected TV, select the desired channel.

- Music/Photo: If you have selected USB, follow these steps to

select a folder containing MP3 (Music) or JPEG (Photo) ﬁles on

the USB device:

✎ The maximum displayed number of files, including sub

folders, in one folder of USB storage device is 2000.

✎ The media may not be playing smoothly when using the

device lower than USB 2.0.

1. Use the ◄/► buttons to move to the ﬁeld under Music

or the ﬁeld under Photo, and then press the ENTER

button. The TV displays a single folder (the Root folder)

and the type or name of the device.

The On Screen Menus

Your TV has two kinds of menus, the Main menu and the various

Tools menus. The Main menu gives you access to most or all of

the menu options available on your TV. The Tools menus display

a selected number of frequently used menu options that change

depending on the screen you are viewing. A Tools menu symbol

(T) in the lower right side of the screen indicates that a Tools menu

is available.

The Main menu has seven primary categories:

y Picture y Input

y Sound y Application

y Channel y Support

y Setup

To view the Main menu, press the MENU button on your remote. To

view a Tools menu, press the TOOLS button on your remote.

✎ The menu options that appear in the Main menu depend

on the Source you have selected. For example, if you have

selected the HDMI source, the Channel category will not

appear. To see the Channe l category, you must first select T V

in the Source List.

The Menu options are presented below, arranged by Main menu

categories. A Tools button symbol (

) next to an option

name indicates the option is also available in one of the Tools

menus.

Picture Menu

Mode

Select your preferred picture mode.

✎ When your TV is conne cted to a PC, you can only select

Entertain and Standard.

■

Dynamic: Brightens the screen. Suitable for a bright room.

■

Standard: Suitable for a normal.

■

Movie: Darkens the screen, making it less glary. Suitable for

watching movies in a darkened room.

■

Entertain: Sharpens the picture. Suitable for games.

✎ Only available when th e TV is connected to a PC.

Backlight / Contrast / Brightness / Sharpness /

Color / Tint (G/R)

■

Backlight: Adjusts the brightness of the screen by adjusting the

brightness of the individual pixels.

■

Contrast: Increases or decreases the contrast between dark and

light areas of the picture.

■

Brightness: Adjusts the brightness of the screen. Not as

effective as Backlight.

■

Sharpness: Sharpens or dulls the edges of objects.

■

Color: Adjusts the color saturation. The higher the Color setting,

the more intense the color. Low settings remove color and the

picture becomes black, white and gray.

■

Tint: Adjusts the amount of green and red in the picture. As you

increase the amount of green, the amount of red decreases and

vice versa.

✎ When the T V is connected to a PC, you can only make

changes to Backlight, Contrast, Brightness, and

Sharpness.

Advanced Settings

Available in Standard and Movie mode only.

Compared to previous models, new Samsung TVs offer a more

precise picture with more precise controls.

✎ When your TV is conne cted to a PC, you can only make

changes to Gamma and White Balance.

■

Color Space (Auto / Native): Auto automatically matches the

range of colors available to create pictures to the color range of

the video source. Native provides a color range wider than the

color range of the video source.

■

White Balance: Adjusts the color temperature of the picture so

that white objects look white (instead of, for example, slightly

pink or slightly yellow) and the overall color of the picture looks

natural.

R-Offset / G-Offset / B-Offset: Adjusts each color’s (red,

green, blue) darkness.

R-Gain / G-Gain / B-Gain: Adjusts each color’s (red, green,

blue) brightness.

Reset: Resets the White Balance to it’s default settings.

■

Gamma: Adjusts the primary color intensity.

■

Dynamic Contrast (Off / Low / Medium / High): Adjusts the

screen contrast.

■

Black Tone (Off / Dark / Darker / Darkest): Selects the black

level to adjust the screen depth. Darker settings make blacks

look darker.

■

Flesh Tone: Adjusts the amount of red in skin tones.

■

Motion Lighting (Off / On): When on, the TV automatically

adjusts the brightness of the screen in response to the

brightness of the room. In bright light, the screen brightens. In

dim light, the screen dims.

✎ Available in Standard mode only.

Picture Options

✎ When the T V is connected to a PC, you can only make

changes to the Color Tone, Size and HDMI Black Level.

■

Color Tone (Cool / Standard / Warm1 / Warm2): Cool makes

the picture bluer (cooler). Warm 1 and Warm 2 make the picture

redder (warmer).

✎ Warm1 and Warm2 are deactivated when the picture

mode is set to Dynamic.

■

Size: Set the size and aspect ratio of the picture on the screen.

Your cable box or satellite receiver may have its own set of

screen sizes as well. However, we highly recommend you use

the TVs 16:9 mode most of the time.

16:9: Sets the picture to the 16:9 wide screen format.

Zoom1: Provides moderate magniﬁcation of the picture. Sides,

top, and bottom are cut off.

Zoom2: Provides larger magniﬁcation of the picture. Sides, top,

and bottom are cut off.

Wide Fit: Enlarges the aspect ratio of the picture so the picture

ﬁts the entire screen.

4:3: Sets the picture to the old, 4:3 format and puts black or gray

borders on the right and left of the picture.

✎ Do not watch your TV in the 4:3 format for a long time.

Traces of borders displayed on the left, right and center of

the screen may cause image retention (screen burn) whic h

is not covered by the warrant y.

Screen Fit: Displays the full image without any cut-off when

your TV is inputting HDMI (720p / 1080i / 1080p) or Component

(1080i / 1080p) HD signals.

✎ HD (High Definition) has a 16:9 aspect ratio and 1080i/1080p

(1920x1080) or 720p (1280x720) resolution.

✎ You can adjust and store settings for each external device you

have connected to an input on the TV. Picture Sizes available

by Input Source are listed below:

2. Press the ENTER

button. A list of folders on the device

appears.

✎ If there are no folders on your device, press the

Yel low select button to select the Root folder, and

then press the RETURN button. The Timer screen

re-appears.

3. Use the ▲/▼ buttons to highlight a folder that contains

music or photos, and then press the Yellow select button

to select the folder.

4. Press the RETURN button. The Timer screen re-appears.

■

Repeat: Select Once, Everyday, Mon~Fri, Mon~Sat, Sat~Sun

or Manual. If you select Manual, you can select the days you

want to activate the timer by using the ◄/► buttons to highlight

the day, and then pressing the ENTER

button. To unselect a

day, highlight it, and then press the ENTER

button.

When you ﬁnished making all your selections on the Timer screen,

press either the ENTER

or RETURN button.

❑ Other Features

Program Rating Lock

The Program Rating Lock feature lets you block programs

you've determined are inappropriate for your children based on

the program's ratings. To access the Program Rating Lock

feature and make any changes, you must enter a PIN (personal

identiﬁcation number). To watch a blocked program, you must also

enter the same PIN.

✎ Program Rating Lock is not available in HDMI or

Component mode.

✎ The default PIN number of a new TV set is “0-0-0-0”. You can

set your own PIN using the Change PIN function.

How It Works

When you access the Program Rating Lock Menu functions for

the ﬁrst time, the PIN input screen appears. Enter 0-0-0-0. The PIN

screen closes and the Program Rating Lock Menu appears. Every

time you access the Program Rating Lock functions, the PIN

screen will appear and you must enter a PIN.

When the Rating Lock screen appears, select Program Rating

Lock, and then press ENTER

. Select On, and then press the

ENTER

key again. Depending on what type of programs or

movies you want to block, select one of the options on the screen,

and then press the ENTER

button. The options are listed below:

■

TV Parental Guidelines: You can block TV programs based

on their ratings. This function allows you to control what your

children are watching.

■

MPAA Rating: You can block movies based on their MPAA

ratings. The Motion Picture Association of America (MPAA) has

implemented a rating system that provides parents or guardians

with advanced information on which ﬁlms are appropriate for

children.

■

Canadian English: You can block TV programs based on their

Anglophone Canadian ratings.

■

Canadian French: You can block TV programs based on their

French Canadian ratings.

■

Downloadable U.S. Rating: Parental restriction information can

be used while watching DTV channels.

Locking/Blocking Programs or Movies

You lock or block programs and/or movies in essentially the same

way for each option. Each option displays a grid or table. All the

tables have ratings listed on the left. The TV Parental Guidelines

option also has kinds of content listed across the top: ALL: Lock all

TV ratings. / FV: Fantasy violence / V: Violence / S: Sexual situation

/ L: Adult Language / D: Sexually Suggestive Dialog.

To lock/block movies or shows with certain ratings and/or kinds of

content, click the square next to the rating and/or under the kind of

content. A lock appears. To unlock/unblock, click the square again.

When you click a low rating, all the ratings above it will also display

locks. You can also Allow All or Lock All. When done, press the

RETURN button on your remote.

■

Change PIN: The Change PIN screen will appear. Choose any

4 digits for your PIN and enter them in Enter New PIN ﬁelds.

Re-enter the same 4 digits in Conﬁrm New PIN ﬁelds. When the

Change PIN screen disappears, press the OK button. The TV

has memorized your new PIN.

✎ If you forget the PIN, press the remote-control buttons in

the following sequence, which resets the pin to “0-0-0-0” :

POWER (off) → MUTE → 8 → 2 → 4 → POWER (on)

Game Mode (On/Off)

When you connect a game console such as a PlayStation™

or Xbox™ to your TV, you can enjoy a more realistic gaming

experience by turning on the Game Mode function.

✎ Precautions and limitations for game mode:

x Before you disconnect the game console and connect another

extern al device, set Game Mode to Off in the setup me nu.

x If you disp lay the TV menu in Game Mode, the scre en shakes

slightly.

✎ Game Mode is not available when the input source is set to

TV.

✎ After connecting the game console, set Game Mode to On.

You may notice slightly reduced picture quality.

Caption

(On-Screen Text Dialogue)

■

Caption: You can switch the caption function on or off. If

captions are not available, they will not be displayed on the

screen.

✎ The Caption feature does not work in Component or

HDMI mode.

■

Caption Mode: You can select the desired caption mode.

Default / CC1~CC4 / Text1~Text4: (analog channels only) The

Analog Caption function operates in either analog TV channel

mode or when a signal is supplied from an external device to the

TV. (Depending on the broadcasting signal, the Analog Caption

function may or may not work with digital channels.)

Default / Service1~Service6 / CC1~CC4 / Text1~Text4:

(Digital channels only) The Digital Captions function works with

digital channels.

✎ Se rv ice1~6 may not be available in digital ca ption mode

depending on the broadcast.

■

Digital Caption Options: (Digital channels only)

Size: Options include Default, Small, Standard and Large. The

default is Standard.

Font Style: Options include Default and Styles 0 to 7. The

default is Style 0.

Foreground Color: Options include Default, White, Black, Red,

Green, Blue, Yellow, Magenta and Cyan. You can change the

color of the letters. The default is White.

Figures and illustrations in this User Manual are provided for reference

only and may differ from actual product appearance. Product design and

speciﬁcations may be changed without notice.

Important Warranty Information Regarding

Television Format Viewing

✎ See the warranty card for more information on warranty

terms.

Wide screen format LED Displays (16:9, the aspect ratio of the

screen width to height) are primarily designed to view wide screen

format full-motion video. The images displayed on them should

primarily be in the wide screen 16:9 ratio format, or expanded to

ﬁll the screen if your model offers this feature and the images are

constantly moving. Displaying stationary graphics and images on

screen, such as the dark sidebars on non- expanded standard

format television video and programming, should be limited to no

more than 5% of the total television viewing per week. Additionally,

viewing other stationary images and text such as stock market

reports, video game displays, station logos, web sites or computer

graphics and patterns, should be limited as described above for

all televisions. Displaying stationary images that exceed the above

guidelines can cause uneven aging of LED Displays that leave

subtle, but permanent burned-in ghost images in the LED picture.

To avoid this, vary the programming and images, and primarily

display full screen moving images, not stationary patterns or dark

bars. On LED models that offer picture sizing features, use these

controls to view different formats as a full screen picture. Be careful

in the selection and duration of television formats you use for

viewing. Uneven LED aging as a result of format selection and use,

as well as burned-in images, are not covered by your Samsung

limited warranty.

•SAMSUNGELECTRONICSNORTHAMERICANLIMITED

WARRANTY STATEMENT

Subject to the requirements, conditions, exclusions and limitations

of the original Limited Warranty supplied with Samsung Electronics

(SAMSUNG) products, and the requirements, conditions, exclusions

and limitations contained herein, SAMSUNG will additionally

provide Warranty Repair Service in the United States on SAMSUNG

products purchased in Canada, and in Canada on SAMSUNG

products purchased in the United States, for the warranty period

originally speciﬁed, and to the Original Purchaser only.

The above described warranty repairs must be performed by a

SAMSUNG Authorized Service Center. Along with this Statement,

the Original Limited Warranty Statement and a dated Bill of Sale

as Proof of Purchase must be presented to the Service Center.

Transportation to and from the Service Center is the responsibility of

the purchaser. Conditions covered are limited only to manufacturing

defects in material or workmanship, and only those encountered

in normal use of the product. Excluded, but not limited to, are

any originally speciﬁed provisions for, in-home or on-site services,

minimum or maximum repair times, exchanges or replacements,

accessories, options, upgrades, or consumables.

For the location of a SAMSUNG Authorized Service Center, please

call toll-free:

–– In the United States : 1-800-SAMSUNG (1-800-726-7864)

–– In Canada : 1-800-SAMSUNG

Still image warning

Avoid displaying still images (such as jpeg picture ﬁles) or still

image elements (such as TV channel logos, TV shows or movies

in panorama or 4:3 format, stock or news scroll bars, etc.) on the

screen. The constant display of still pictures can cause ghosting or

image burn-in (image retention) on the LED screen, which will affect

image quality. To reduce the risk of this effect, please follow the

recommendations below:

•Avoid displaying the same TV channel for long periods.

•Always try to display any image in full screen mode. Use the TV's

Picture Options menu to select the optimal screen size.

•Reduce brightness and contrast values to the minimum required

to achieve the desired picture quality. Values that exceed the

minimum may speed up the burn-in process.

•Frequently use all TV features designed to reduce image retention

and screen burn-in. Refer to proper user manual section for

details.

LED TV

user manual

Contact SAMSUNG WORLDWIDE

If you have any questions or comments relating to Samsung products,

please contact the SAMSUNG customer care center.

Country CANADA U.S.A.

Address

Samsung Electronics

Canada Inc., Customer

Service 55 Standish Court

Mississauga, Ontario L5R

4B2 Canada

Samsung Electronics

America, Inc.

85 Challenger Road

Ridgeﬁeld Park, NJ 07660

Customer Care Center



1-800-SAMSUNG(726-7864)

Web Site

www.samsung.com/ca

(English)

www.samsung.com/ca_fr

(French)

www.samsung.com

- 2 -- 1 -

- 6 -- 5 -

- 3 -

- 7 -

- 4 -

- 8 -

BN68-04674A

BN68-04674A-00

Input Source Picture Size

ATV, AV, Component (480i, 480p)

16:9, Zoom1, Zoom2,

4:3

DTV (1080i, 1080p), Component (1080i,

1080p), HDMI (720p, 1080i, 1080p)

16:9, Wide Fit, 4:3,

Screen Fit

■

Digital Noise Filter (Off / Low / Medium / High / Auto) : If the

broadcast signal received by your TV is weak, you can activate

the Digital Noise Filter feature to reduce any static and ghosting

that may appear on the screen.

✎ When the signal is weak, try all the Digital Noise Filter

options until the TV dis plays the best picture.

■

HDMI Black Level (Normal / Low) : For HDMI signals, select

the black level to adjust the screen depth. Low make blacks look

darker.

✎ Available only in HDMI mode (RGB signals).

■

Film Mode (Off / Auto) : Sets the TV to automatically sense and

process ﬁlm signals from all sources and adjusts the picture for

optimum quality.

✎ Available in ATV, DTV (interlace), AV, COMPONENT (480i /

1080i) and HDMI (480i / 1080i).

■

Auto Motion Plus (Off / Clear / Standard / Smooth / Custom /

Demo): Enhances motion in fast moving scenes.

✎ The info sc reen on your T V displays the resolution and

freque ncy of the incoming video signal (60Hz). This

displayed frequency is not what the T V is displaying by

using the Auto Motion Plus function.

■

LED Motion Plus (Off / On): Removes drag from fast scenes

with a lot of movement to provide a clear picture.

Picture Reset

■

Picture Reset (Reset Picture Mode/Cancel): Resets the

picture settings to their factory defaults.

Sound Menu

Mode

■

Standard: Selects the normal sound mode.

■

Music: Emphasizes music over voices.

■

Movie: Provides the best sound for movies.

■

Clear Voice: Emphasizes voices over other sounds.

■

Amplify: Increase the intensity of high-frequency sounds to allow

a better listening experience for the hearing impaired.

Equalizer

Available in Standard sound mode only.

■

Balance L/R: Adjusts the balance between the right and left

speaker.

■

100Hz / 300Hz / 1KHz / 3KHz / 10KHz (Bandwidth

Adjustment): Adjusts the loudness of speciﬁc bandwidth

frequencies.

■

Reset: Resets the equalizer to its default settings.

SRS TruSurround HD

Available in Standard sound mode only.

SRS TruSurround HD is a patented SRS technology that solves

the problem of playing 5.1 multichannel content through two

speakers. TruSurround delivers a compelling, virtual surround

sound experience through any two-speaker playback system,

including internal television speakers. It is fully compatible with all

multichannel formats.

Preferred Language

Digital channels only.

Digital-TV broadcasts can transmit many audio tracks

simultaneously (for example, simultaneous translations of a program

into foreign languages).

✎ You can only select a language from among the ones being

broadcast.

Multi-Track Sound (MTS)

Analog channels only.

■

Mono: Select for channels that are broadcasting in mono or if

you are having difﬁculty receiving a stereo signal.

■

Stereo: Select for channels that are broadcasting in stereo.

■

SAP: Select to listen to the Separate Audio Program, which is

usually a foreign-language translation.

✎ Depending on the program being broadcast, you can listen to

Mono, Stereo or SAP.

Auto Volume

Because each station has its own broadcasting conditions, the

volume may ﬂuctuate each time you change the channel. This

feature automatically adjusts the volume of a channel by lowering

the sound output when the modulation signal is high or by raising

the sound output when the modulation signal is low.

Sound Reset

■

Reset All: Resets all sound settings to the factory defaults.

Channel Menu

❑ Memorizing Channels

When you ﬁrst set up your TV using Plug & Play, the TV

memorized the channels that were available over the air or through

your cable system and added them to the Channel List. The

Antenna and Auto program functions described below let you

re-run the channel memorization function without having to re-run

the Plug & Play procedure.

Antenna (Air / Cable)

Before your television can memorize the available channels, you

must select your TV's signal source, Air (using an antenna) or

Cable. Select Menu >Channel > Antenna > Air or Cable. After

you have selected the signal source, go on to the Auto Program

function.

✎ Selecting the signal source using the Antenna function also

determines the signal source the TV is tuned to. For example,

if you receive your TV signal over the air, and you select

Cable, you will see only snow. You must select Air to see a

picture.

Background Color: Options include Default, White, Black, Red,

Green, Blue, Yellow, Magenta and Cyan. You can change the

background color of the captions. The default is Black.

Foreground Opacity: This adjusts the opacity of text. Options

include Default, Transparent, Translucent, Solid and Flashing.

Background Opacity: This adjusts the opacity of the caption

background. Options include Default, Transparent, Translucent,

Solid and Flashing.

Return to Default: This option sets each Size, Font Style,

Foreground Color, Background Color, Foreground Opacity and

Background Opacity to its default.

✎ Digital Caption Options are available only when you can

select Default and Service1 ~ Service 6 in Caption Mode.

✎ The Foreground and Bac kground cannot be set to the

same color.

Melody

Lets you control whether a melody plays when the TV is turned on

or off.

✎ The Melody does not play:

x When no sound is output f rom the TV because the MUTE

button has been pressed.

x When no sound is output f rom the TV because the volume

has been reduced to minimum with the VOL – button.

x When the T V is turned off by the Sleep Timer function.

Auto Protection Time

■

Auto Protection Time (Off / 2 hours / 4 hours / 8 hours / 10

hours): If the screen remains idle with a still image for a certain

period of time you deﬁne, the screen saver is activated to prevent

the formation of ghost images on the screen.

Eco Solution

■

Energy Saving (Off / Low / Medium / High / Picture Off) :

This adjust the brightness of the TV in order to reduce power

consumption. If you select Picture Off, the screen is turned

off, but the sound remains on. Press any button except volume

button to turn on the screen.

■

No Signal Power Off (Off / 15 min. / 30 min. / 60 min.): Sets

how quickly the TV switches to standby mode, if no picture is

being received.

✎ Disabled when the PC is in power saving mode.

■

Auto Power Off (Off / On): The TV will be automatically turned

off when no user operation is received for 4 hours.

Support Menu

Self Diagnosis

■

Picture Test: Use to check for picture problems. If the problem

appears in the test picture, select Yes and follow the directions

on the screen.

■

Sound Test: Use the built-in melody sound to check for sound

problems. If the problem occurs during the test, select Yes and

follow the directions on the screen.

■

Signal Strength: (Digital channels only) An HD channel’s

reception quality is either perfect or the channels are unavailable.

Adjust your antenna to increase signal strength.

■

Reset: Reset all settings to the factory defaults.

✎ The PIN input screen appears before the setup screen.

✎ Enter your 4- digit PIN. Change the PIN using the Change

PIN option.

Software Upgrade

Software Upgrade can be performed by downloading the latest

ﬁrmware from samsung.com to a USB memory device.

HD Connection Guide

Refer to this information when connecting external devices to the

T V.

Contact Samsung

View this information when your TV does not work properly or

when you want to upgrade the software. You can ﬁnd information

regarding our call centers and how to download products and

software.

Media Play

Enjoy photos, music and/or movie ﬁles saved on a

USB Mass Storage Class (MSC) device.

POWER

MEDIA.P

❑ Connecting a USB Device

1. Turn on your TV.

2. Connect a USB device containing photo, music, and/or movie

ﬁles to the USB jack on the back of the TV. A pop up window

appears.

3. Press the MEDIA.P button on your remote. The Media Play

menu appears.

❑ Using the Media Play Menu

SUM

■

Change Device

Enter

Return

Media Play

Videos

To open Media Play in the Menu, follow these steps:

1. Press the MENU button. Then, press the ▲ or ▼ button to

select Application on the left, and then press the ENTER

button.

2. Press the ▲ or ▼ button to select Media Play (USB), and then

press the ENTER

button.

3. Press the ◄ or ► button to select an icon (Videos, Music,

Photos, Settings), and then press the ENTER

button.

✎ Media Play might not work properly with unlicensed

multimedia files.

✎ Need-to-Know List before using Media Play (USB)

x The fil e system suppo rts FAT16, FAT32 and NTFS.

x Cert ain types of U SB Digital camera and audio devices m ay not

be compatible with thi s TV.

x Media Pl ay only supports USB Mas s Storage Clas s (MSC)

device s. MSC is a Mass Storage Class Bulk-Only Transport

device. Examples of MSC are Thumb drives and Fla sh Card

Readers. Devices s hould be connected direc tly to the TV’s USB

port. USB HDD is not supported.

[UEH6003-ZA]BN68-04674A-ENG.indd 1 2012-08-17 �� 4:57:32

Samsung UN60EH6003F - Page 27

Table of Contents

Other manuals for Samsung UN60EH6003F

Related product manuals