Samsung UN60ES7500FXZA - Page 44

English - 44
IR Blaster Pairing
1. Turn the IR Blaster on, and if the LED blinks, connect the IR Blaster to the TV.
2. Briefly point the IR Blaster toward the IR sensor of the TV and press the PAIRING button at the bottom.
3. The connection icons appear on the bottom left of the screen, and the TV connects to IR Blaster
automatically.
✎
If the connection process failed, please turn off and on the IR Blaster, try again from step 2.
O
PEN
O
N
O
FF
PAIRING
O
PEN
• IR Blaster PAIRING Reset button.
Precautions for Using an IR Blaster
To use an IR Blaster, the IR Blaster must be located nearby with external devices connected to the TV.
Note that it should be no obstacle between the external device's IR receiver and an IR Blaster.
[UE7500-ZX]BN68-04032C-00L02.indb 44 2012-03-05 �� 11:28:44