3-2
3. Disassembly and Reassemble
Description Picture Description Screws
2
Remove the screws of rear-cover.
(In this step, Two types of screws are
used.)
46" : 12EA / 2EA•
55" : 14EA / 4EA•
60" : 16EA / 2EA•
Torque :
7~ 8Kgf.cm.
6001-002755
Torque :
9~ 11Kgf.cm.
6001-001782
3
Remove the Main Board and the
Power Board.
NOTE
Applied to Double locking.
Flip up the locking tab on top of the 1.
connector.
Squeeze the edge of the connector 2.
to release the second tab lock and
gently pull the connector away.
To Next Page
Loading...
