Need help?Do you have a question about the Samsung UN65JU7100F and is the answer not in the manual?
General| Response time | - ms |
|---|---|
| Display diagonal | 64.5 \ |
| Display brightness | - cd/m² |
| LED backlighting type | - |
| Supported video modes | 1080p |
| Supported graphics resolutions | 3840 x 2160 |
| Motion interpolation technology | CMR (Clear Motion Rate) 240 |
| Digital signal format system | ATSC |
| Audio decoders | DTS, DTS Premium Sound 5.1, DTS Studio Sound |
| RMS rated power | 20 W |
| Number of speakers | 2 |
| PC in (D-Sub) | No |
| HDMI ports quantity | 4 |
| DVI-D ports quantity | 0 |
| USB 2.0 ports quantity | 3 |
| Component video (YPbPr/YCbCr) in | 1 |
| Consumer Electronics Control (CEC) | Anynet+ |
| On Screen Display (OSD) languages | ENG, ESP, FRE |
| Picture processing technology | Samsung Wide Color Enhancer |
| Product color | Silver |
| Panel mounting interface | 400 x 400 mm |
| AC input voltage | 110 - 120 V |
| AC input frequency | 60 Hz |
| Power consumption (max) | 265 W |
| Power consumption (standby) | 0.3 W |
| Power consumption (typical) | 85 W |
| Package depth | 185.42 mm |
| Package width | 1671.32 mm |
| Package height | 952.5 mm |
| Package weight | 34110 g |
| Sustainability certificates | ENERGY STAR |
| Cables included | AC |
Weight and Dimensions| Depth (with stand) | 294.64 mm |
|---|---|
| Height (with stand) | 896.62 mm |
| Weight (with stand) | 28077 g |
| Depth (without stand) | 68.58 mm |
| Width (without stand) | 1463 mm |
| Height (without stand) | 843.28 mm |
| Weight (without stand) | 23813 g |
Follow safety, servicing, and ESD precautions to prevent damage and hazards.
Do not modify circuit board. Disconnect power before servicing for safety.
Perform safety checks like lead dress inspection and leakage current hot check.
Use recommended parts for safety; identify special characteristics with A.
Handle ESD devices carefully, drain static charge, use grounded soldering iron.
Provides step-by-step procedures for disassembling and reassembling the LED TV.
Details TV disassembly steps, including removing stand and rear cover screws.
Offers basic troubleshooting steps, including cable checks and power input verification.
Covers initial checks for video issues and distinguishing between Main Board and T CON board problems.
Guides on identifying and checking fault symptoms, focusing on video issues and test patterns.
Details Customer Picture Test and FRC/T-CON troubleshooting with specific test patterns.
Addresses One Connect Mini issues like no screen display or unexpected rebooting.
Details factory options for various models, including panel spec and board information.
Lists factory options and their specific values for different screen sizes and configurations.
To Next Page