5.6.2 Wake On Lan
When you turn on this switch, you can remotely boot the device by sending a
boot command through a wired network while connecting a network cable.
5.6.3 HDMI CEC
All device connected by HDMI can be controlled through the remote controller
of the display or connected device, if HDMI-CEC is supported and enabled.
5.6.4 USB Clone
Quick setting synchronization is possible by exporting default settings through
USB clones or importing settings from other devices. You can synchronize
settings values for system settings or touch menus.
5.6.5 Default Startup Item
If the default startup item is specified, the corresponding App / Webpage /
Document can be automatically displayed after startup.
The supporting Apps are [Browser], [Note], and [Palette].
To Next Page
Loading...
