66
Preset timing modes
The screen will automatically be adjusted if a signal that belongs to the following standard
signal modes is transmitted from your PC. If the signals transmitted from the PC differ from
the standard mode, the screen may not be displayed. In such a case, change the settings as
shown in the following table by referring to the graphics card user manual.
No. Signal timing name Reference
clock Hf Vf
HDMI VGA TypeC
[MHz] [KHz] [Hz]
1 IBM / Y /
2 Y Y Y
56.25 / Y Y
Y Y Y
5 65 Y Y Y
6 Y Y Y
7 Y Y Y
Y Y Y
Y Y Y
Y Y Y
11 Y Y Y
12 Y Y Y
Y Y Y
Y Y Y
15 CEA 67.5 Y Y Y
16 CEA 25.175 / / Y
17 CEA 25.2 / / Y
CEA / / Y
CEA / / Y
CEA / / Y
21 CEA / / Y
22 CEA / / Y
CEA / / Y
CEA / / Y
25 CEA / / Y
26 CEA 6 7. 5 / / Y
No. Signal timing name Reference
clock Hf Vf
HDMI VGA TypeC
[MHz] [KHz] [Hz]
27 CEA 27 / / Y
CEA 27 / / Y
CEA / / Y
CEA / / Y
CEA 56.25 / / Y
CEA / / Y
CEA 27 / / Y
CEA 25 / / Y
CEA / / Y
CEA / / Y
CEA 27 Y / /
CEA 27 Y / /
CEA Y / /
CEA 27 15.625 Y / /
CEA 27 Y / /
CEA Y / /
CEA Y / /
CEA Y / /
CEA Y / /
CEA Y / /
CEA Y / /
CEA 6 7. 5 Y / /
CEA 56.25 Y / /
CEA Y / /
51 CEA Y / /
52 CEA 25 Y / /
CEA 27 Y / /
CEA Y / /
55 CEA Y / Y
56 CEA 112.5 Y / Y
57 CEA 6 7. 5 Y / Y
CEA 56 25 25 Y / Y
CEA Y / Y