Parts
WA65C/WA75C
Speaker
Power button Indicator Light sensor
"
notice to improve quality.
Parts Description
Speaker Speaker output
The pen is magnetic. Keep it by attaching to the marked location.
Power button &
indicator
Press the button to turn on the product and press and hold the button to turn off the
product.
" The power indicator turns white when the product is turned on.
" The power indicator turns red when the product is turned off.
In writing mode, lightly press the Power button to switch to the screen saver mode.
In case the PIP screen is in Full Screen mode, press the Power button to display the
adjustment menu. Press again to hide.
Light sensor The light sensor is used to detect ambient light for the Brightness Optimisation
function.
• You can turn on or off the Brightness optimization function at MenuSETTINGS
SystemAdvanced SettingsBrightness Optimisation.
OPS case (Sold
separately)
Connect the OPS case to the product and insert the standard OPS module into the
case. You can purchase the OPS case and module separately.
Before inserting the OPS module, make sure to remove the power cable from
the product to completely cut off the power supply.
"
"
To Next Page
Loading...
