27
Part Name Descriptive Picture How To Do
Door-
Hinge
ķ Remove the fi xing screws holding the
Door-Glass.
ĸ Separate the glass.
Ĺ After removing the two screws holding the
Holder Glass, replace the Door Hinge.
ĺ After putting them back together, check
if the screws holding the Door Hinge is
fastened properly.
Drain Pump
ķ Insert the fl at head screwdriver into the
slot on the top of the Cover Filter and
lever it down to separate it.
ĸ Unscrew the drain fi lter by turning it
counter clockwise.
- The water remaining inside could fl ow out.
So, put an empty bowl on the fl oor to hold
the water.
To Next Page
Loading...
