Samsung WF1114 Series - Page 33

Troubleshooting _ 31
Error Type
Drum
Fully
automatic
Causes Remarks
Error
mode
Old
error
mode
For USA
Foaming
Detected
Sud - SUdS -
- This occurs when too much foaming is detected.
It is also displayed while foaming is removed.
When the removal is finished, the normal cycle
proceeds. “Sud” or “SUdS” is displayed when too
much foaming is detected and “End” is displayed
when the removal of the foaming is finished.
(This is one of the normal operations. It is an error
for preventing non-sensing faults.)
Mems PBA
Error Detected
8E - E8 -
- Error detected in the Mems PBA or data error
detected. Check the wire connections.
Replace if necessary.
1. Check the wire connections.
2. Replace the Mems PBA.
3. Main PBA wire connection error or PBA’s silver
nano part malfunction. Replace if necessary.