36 _ Troubleshooting
Error Type Error Mode Causes Corrective Actions Description of Photo
Water Leakage
Error
LE
LE1
• Check for any leakage.
• Foreign material in the DV case
• Fault of a hose or incorrect part
engagement in the product
• Check for any leakage on the base, Hose,
Valve and Tub connections and take any
required action.
• Check the drain motor operation. Replace if it
does not operate normally.
Check for any leakage on the
base, Hose, Valve and Tub
connections.
Overflow Error
OE
OF
• Water level sensor fault
• Freezing in the winter season
• If the water level sensor has a functional error,
replace it.
• Check the hose. This error occurs if it is torn
or has a hole.
• This error occurs if water is frozen in the
winter season. Check the method to remove
freezing and follow as directed.
Check the hose connected to
the water level sensor.
Check whether the
hose is folded, cut, or
damaged.
Temperature
Sensor Error
tE1
tE2
tE3
• Washing temperature sensor fault
• Dry temperature sensor fault
• Faulty and incorrect connections
of the dry condensing sensor
• Main PCB fault
• Freezing in the winter season
• Check the connections for the washing heater
temperature sensor connector.
• If the washing heater temperature sensor has
a functional error, replace it.
- A tE1 error occurs.
• Check the connections for the dry heater
temperature sensor connector.
• If the dry heater temperature sensor has a
functional error, replace it.
- A tE2 error occurs.
• Check the connections for the duct
condensing temperature sensor connector.
• If the duct condensing temperature sensor
has a functional error, replace it.
- A tE3 error occurs.
-
Unbalance Error UE
• Motor hall sensor fault
• Caused by the laundry
• Check the type of laundry. Check whether
they may cause an unbalanced situat ion.
- If they are small but absorb a lot of water,
make sure to check and follow the related
directions in the user manual and follow
the directions.
-
To Next Page
Loading...
