Samsung WF511AB series - Installation Procedure

14 _ Removal and Reassembly
Part Figure Description
Separating the
Cover_Top and
Panel-Control
(Check Main-PCB
and Sub-PCB)
6. PullthePANEL-CONTROLtowardsandthenliftit
upwardstoseparate.
7. Carefullydisconnectthethreewiringconnectorsby
hand.
8. Removethe11screwsholdingthePCBand
releasethehooksonbothsidestoremovethe
PCBforrepair/replacement.