Control panel overview
27
1. Introduction
6 Left/Right Arrows Scrolls through the options available in the selected
menu and increases or decreases values.
7 Menu
Opens Menu mode and scrolls through the available
menus.
8 OK Confirms the selection on the screen.
9
Numeric keypad
Dials a number or enters alphanumeric characters.
10 Address
Book
Allows you to store frequently used fax numbers or
search for stored fax numbers.
11 Redial/
Pause(-)
Redials the last number in ready mode, or inserts a
pause(-) into a fax number in edit mode.
12 Stop/
Clear
Stops an operations at any time.
13 Power/
Wake Up
Turns the power on or off, or wakes up the machine
from the power save mode. If you need to turn the
machine off, press this button for more than three
seconds.
14 Start Starts a job.
15 Power
Saver
Goes into power save mode.
16 On Hook
Dial
When you press this button, you can hear a dial
tone. Then enter a fax number. It is similar to making
a call using speaker phone.
17 Back Sends you back to the upper menu level.
18 Scan
Switches to Scan mode.
19
Status LED
Indicates the status of your machine (see
"Understanding the status LED" on page 107).
20 Eco Turn on Eco mode to reduce toner consumption
and paper usage (see"Eco printing" on page 58).
To Next Page
Loading...
