Wireless network setup
124
2. Using a Network-Connected Machine
• Network Password: Enter the encryption network password value.
• Confirm Network Password: Confirm the encryption network
password value.
• WEP Key Index: If you are using WEP Encryption, select the appropriate
WEP Key Index.
The wireless network security window appears when the access point has
security enabled.
Enter the Network Password of the access point (or router).
11
The window showing the wireless network setting appears. Check the
settings and click Next.
• Can start to build Wi-Fi Direct by using Samsung Easy Printer Manager
(see "Setting up Wi-Fi Direct" on page 127).
• Wi-Fi Direct Name: The default Wi-Fi Direct Name is the model name
and the maximum length is 23 characters.
• Password setting is the numeric string, and the size is 8 ~ 64 characters.
12
The Wireless Network Setting Complete window appears. Click Next.
13
When the wireless network settings are completed, disconnect the USB
cable between the computer and machine. Click Next.
14
Follow the instructions in the installation window.
Access point without a USB cable
Items to prepare
• WiFi-enabled Mac running Mac OS 10.7 or higher and an access point
(router)
• Software CD that was provided with your machine
• A machine installed with a wireless network interface
1
Make sure that the machine is connected to your computer and
powered on.
2
Insert the supplied software CD into your CD-ROM drive.
3
Select the CD-ROM volume that appears on Finder.
4
Double-click Install Software icon.
5
Read the license agreement and installation agreement button.
6
Click Next.
7
Select Wireless on the Printer Connection Type screen.
8
Click Next.
9
Select Using a direct wireless connection on the Select the Wireless
Setup Method screen. Then, click Next.
To Next Page
Loading...
