Samsung XPRESS M301 SERIES - Page 127

Wireless network setup
127
2. Using a Network-Connected Machine
3
Click Login on the upper right of the SyncThru™ Web Service website.
4
Type in the ID and Password then click Login.
• ID: admin
• Password: sec00000
5
When the SyncThru™ Web Service window opens, click Settings >
Network Settings.
6
Click Wi-Fi.
7
You can also turn the Wi-Fi network on/off.
15
Setting the Wi-Fi Direct for mobile printing
Wi-Fi Direct is a secure and easy-to-use peer-to-peer connection between a Wi-
Fi Direct-enabled printer and mobile device.
With Wi-Fi Direct, you can connect your printer to a Wi-Fi Direct network while
concurrently connecting to an access point, You can also use a wired network
and a Wi-Fi Direct network simultaneously so multiple users can access and print
documents both from Wi-Fi Direct and from a wired network.
• You cannot connect your mobile device to the internet through the
printer’s Wi-Fi Direct.
• The supported protocol list may differ from your model, Wi-Fi Direct
networks do NOT support IPv6, network filtering, IPSec, WINS, and SLP
services.
• The maximum number of devices that can be connected via Wi-Fi Direct
is 4.
Setting up Wi-Fi Direct
You can enable Wi-Fi Direct feature by one of the following methods.
From the USB cable-connected computer
After the driver installation is complete, Samsung Easy Printer Manager can be
used to change Wi-Fi Direct settings.
Samsung Easy Printer Manager is Available for Windows and Mac OS
users only.
•From the Start menu, select Programs or All Programs > Samsung
Printers > Samsung Easy Printer Manager > Device Settings > Network.
- Wi-Fi Direct On/Off: Select On to enable.
- Device Name: Enter the printer’s name for searching for your printer on
a wireless network. By default, the device name is the model name.