Media and tray
29
2. Basic Setup
3
Flex or fan the edge of the paper stack to separate the pages before
loading papers.
4
After inserting paper into the tray, squeeze the paper width guides and
paper length guide.
• Do not push the paper width guide too far causing the media to warp.
• If you do not adjust the paper width guide, it may cause paper jams.
• Do not use a paper with a leading-edge curl, it may cause a paper jam or
the paper can be wrinkled.
5
Insert the tray back into the machine.
6
When you print a document, set the paper type and size for the tray (see
"Print media specifications" on page 76).
To Next Page
Loading...
