EasyManua.ls Logo

Samyung ENC SMR-715 series User Manual

Samyung ENC SMR-715 series
192 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
MARINE RADAR
EQUIPMENT
INSTRUCTION
MANUAL

Table of Contents

Question and Answer IconNeed help?

Do you have a question about the Samyung ENC SMR-715 series and is the answer not in the manual?

Samyung ENC SMR-715 series Specifications

General IconGeneral
BrandSamyung ENC
ModelSMR-715 series
CategoryMarine Radar
LanguageEnglish

Summary

Chapter 1 Installation

1.2 Installation of the Display Unit

Guidance on installing the radar display unit, including positioning and mounting.

1.3 Installation of the Scanner Unit

Guidelines for selecting the optimal installation position and height for the scanner unit.

Chapter 2 Start the Basic Operation

2.2 Power On/Off

Procedures for powering the radar system on and off safely.

Chapter 3 Adjust the Radar Echo

3.1 Change Range

How to change the radar's range scale for observation.

3.2 Sensitivity Adjustment

Adjusting the radar's gain for optimal sensitivity and target detection.

3.3 Sea Clutter Suppression

Adjusting sea clutter suppression to reduce unwanted echoes from the sea surface.

3.4 Rain/Snow Clutter Suppression

Adjusting rain/snow clutter suppression to filter out weather-related echoes.

Chapter 4 VRM and EBL Function

Chapter 5 Various Function Icons

5.1 MOB Function (Man Overboard)

Using the Man Overboard function for quick marking and rescue.

5.6 AIS Operations

Integrating and using Automatic Identification System (AIS) data with the radar.

5.7 TT Operations

Utilizing Target Tracking (TT) function for monitoring target movement.

5.13 Tuning

Adjusting the radar's tuning for optimal performance.

5.17 Target

Configuring target tracking (TT) and AIS functions.

Chapter 6 Option Functions

Chapter 7 Initial Settings

7.2 Tuning Adjustment

Adjusting the radar's tuning for optimal receiver sensitivity.

7.3 Bearing Adjustment

Calibrating the bearing measurement to match the ship's compass.

7.4 Range Adjustment

Calibrating the range measurement to match known targets.

Chapter 8 Detail Performance Settings

8.1 Sets Radar Echo

Adjusting parameters that significantly affect the radar image.

8.2 TT Function

Configuring the Target Tracking (TT) function for movement analysis.

8.3 Scanner Function

Adjusting scanner functions for optimal radar operation.

8.5 Maintenance Setting

Accessing maintenance and reset functions.

8.6 System Setting

Configuring system parameters like boot settings and units.

Chapter 9 Maintenance and Check

9.5 Fault Finding

Troubleshooting guide for identifying and resolving system faults.

9.6 Trouble Shooting

General troubleshooting steps for common issues.

Chapter 10 After-Sale Service

Chapter 12 Specifications

Initial Setting Menu

Related product manuals