(2) 1200 PSI Hard Surface Extractor
Dear Valued Client,
Congratulations on the purchase of your Sniper 12-Gallon 1200 PSI Hard Surface
Extractor! The world of oor cleaning is becoming more high-tech and competitive
and we strive to provide you with the most innovative products. Our extractor is yet
another example of this, bringing a new dimension to high-pressure oor cleaning
with its cutting-edge features, quality and value.
Please review this manual paying careful attention to the Safety Instructions section.
Keep in mind that any unnecessary damage, neglect or abuse of this machine will void
your warranty. You can be condent that simple maintenance will ensure that your
extractor provides quality performance for many years to come.
If warranty questions arise, please consult your manual or contact your distributor.
Should you have any questions regarding maintenance, replacing parts or ordering
parts, please call an authorized distributor.
Before you begin using your extractor thoroughly review the Owner’s Manual.
Again, congratulations on the purchase of your Sniper 12-Gallon 1200 PSI Hard Surface
Extractor!
Equipment Videos
Machine Training: www.sandiaplastics.com/equipmentVideos.aspx
Machine Features and Benets: www.sandiaplastics.com/featuresVideos.aspx
Questions or Comments?
Phone: 714-901-8400
Toll Free: 800-983-5834
Fax: 714-901-8404
Ultimate Solutions Corporate Oces:
15571 Container Lane, Huntington Beach, CA 92649
Visit our website at: www.sandiaplastics.com
Register your machine online at: www.sandiaplastics.com/registration.aspx
Mail to:
Ultimate Solutions Corporate Oces
15571 Container Lane
Huntington Beach, CA 92649
See reverse side for Warranty Information.
Make a copy of this card for future reference.
Copyright © 2016 Ultimate Solutions | Sandia Products. All Rights Reserved.
ACTIVATE YOUR WARRANTY!
Please take a moment to register your machine. Fill out the
information below and mail back to Sandia Products immediately.
The warranty starts on the purchase date by the original purchaser subject to proof
of purchase. This Machine Registration Card must be completed and returned
immediately at the time of purchase. If proof of purchase cannot be identied,
the warranty start date is ninety (90) days after the inventory stocking date at the
distributor’s warehouse.
Your machine may also be registered online at:
www.sandiaplastics.com/registration.aspx
Machine Model Purchase Date
Motor Type Serial No.
Place of Purchase
Shipped To
Your Name Phone
E-mail Fax
Address Line 1
Address Line 2
City State Zip
Comments:
To Next Page
Loading...