2. Click Device Manager on the left pane.
NOTE: Sansa Clip Sport uses MSC mode only.
The SanDisk player will show up on Device Manager's right pane as:
1. USB Mass Storage device
If there is a yellow exclamation point (!) or question mark (?) beside the device, try to refresh the
drivers.
STEP 3 - Refresh the drivers
1. Right-click the entry with the error mark, select Uninstall.
2. On the top menu, click Action then select Scan for hardware changes.
NOTE: If a device with yellow exclamation point (!) continually appears and disappears, then
the player is most likely failed. Additional troubleshooting is unlikely to correct the problem.
Additional troubleshooting notes:
If you have replaced the Sansa Player and you still have problems getting it to recognize in the
To Next Page
Loading...
