FRONT LED
When active, the front LED on the device will illuminate as a white light.
There is a single LED for PRO-BLADE STATION activity, plus individual LED
lights for each PRO-BLADE SSD mag slot activity. The LED is either on, off,
or blinks with a certain rhythm to indicate a specific "System Condition".
An LED "System Condition" list for the
PRO-BLADE STATION and the PRO-
BLADE SSD mag are outlined below.
STATION LED Behavior
System Condition
O Power is O or disconnected.
On The PRO-BLADE STATION is powered On.
On, then turns O after several minutes. The PRO-BLADE STATION turns O due to
inactivity, or because it is not connected to a
host.
Fast Breathing Rhythm The PRO-BLADE STATION is overheating or at
fault.
Mag Slot LED Behavior System Condition
O The PRO-BLADE SSD mag is not connected or
the PRO-BLADE STATION is powered O.
On The PRO-BLADE SSD mag is connected to the
PRO-BLADE STATION and the device is powered
On.
Flashing Activity on the PRO-BLADE SSD mag device.
Fast Breathing Rhythm The PRO-BLADE SSD mag is overheating, or at
fault.
PRO-BLADE STATION
SanDisk Professional
User Manual
9
To Next Page
Loading...
