To Next Page

To Previous Page

In models COR-IND-M 1000/12 and COR-

IND-M 1500/18, when the curtain is stopped

using the remote control (CR-30) in hot

mode, the resistances will stop and the fan

will continue operating for approximately 3

minutes with the aim of reducing the thermal

inertia of the resistances.

PROTECTION AGAINST OVERHEATING:

The COR-IND Air Curtains are ﬁ tted with

one thermal f use which automatically

disconnects the unit in case of overheating.

In the event of this happening please contact

the ofﬁ cial S&P dealer in your area.

MAINTENANCE:

The COR-IND Air Curtains do not need any

special maintenance, but it is recommended

to keep the inlet and outlet grilles clean.

Clean them with a dry cloth (avoid using

solvents or abrasive detergents). Once a

year, the inside parts should be cleaned by

a qualiﬁ ed electrician using compressed air

or a vacuum cleaner. In order to carry out

any maintenance tasks, the omnipolar cut-

off device must be activated to ensure that

none of the parts inside the apparatus are

live.

AFTER SALES SERVICE:

In the event of any problems with the unit, it

is advised to contact your S&P dealer. Any

manipulation of the appliance by personnel not

appointed by S&P will cancel the guarantee.

S&P reserves the right to modify the product

without prior notice.

Questions and Answers:

Need help?

Do you have a question about the S&P COR-IND-M 1000 F and is the answer not in the manual?

S&P COR-IND-M 1000 F Specifications

General