S&P SILENT-100 DESIGN User Manual

If you exceed the 50s and the humidity level
in the room is below the selected level, the
fan switches on, and when the light
switches off, runs the time set by the timer.
This function is selected with the dip-switch
8.
Factory settings:
- Interval function: OFF
- Interval time: 4h
- Humidistat: 60%HR
- Timer: 1 minute
- Start-up timer function: OFF
SILENT-100 CHZ DESIGN 12V
For this models use the diagram (Fig.6)
(Fig.7)
User instruction
This instruction is available under
http://www.solerpalau.com or contact your
National Soler y Palau contact.
List see http://www.solerpalau.com.
This appliance can be used by children
aged from 8 years and above and persons
with reduced physical, sensory or mental
capabilities or lack of experience and
knowledge if they have been given
supervision or instruction concerning use of
the appliance in a safe way and understand
the hazards involved. Children shall not play
with the appliance. Cleaning and user
maintenance shall not be made by children
without supervision.
Maintenance
The extractor fan only requires periodical
cleaning using a cloth lightly impregnated
with a soft detergent.
After Sales Service
We recommend you not to try to dismantle
or remove any other parts than those
mentioned as any tampering would
automatically cancel the S&P guarantee. If
you detect any fault, contact your S&P
dealer.
S&P reserves the right to alter specifications
without notice.

S&P SILENT-100 DESIGN Specifications

General

Sound Level	26.5 dB(A)
Power Consumption	8 W
Voltage	230 V
Frequency	50 Hz
IP Rating	IP45
Type	Axial
Mounting	Wall/Ceiling
Diameter	100 mm
Model	SILENT-100 DESIGN
Category	Fan
Airflow	95 m³/h